Firefighting foam

Angus Fire Respondol ATF 3-3 and 3-6

Respondol ATF is a superior quality synthetic fluorine free (FF) foam concentrate, designed for extinguishing and securing all types of flammable liquid fires and Class A incidents. Respondol ATF has been designed specifically for general emergency responders who are faced with a variety of risks in a range of situations.

• Fast knock-down and extinguishment exceeding the requirements of EN1568 pt 3 & 4.
• Lower viscosity than many other fluorine free foams to ensure easy induction.
• Fluorine free
• Various induction rates on both hydrocarbon and polar solvent risks.

Respondol® is a registered trademark of Angus Holdings Safety Group Ltd.

Respondol ATF 3-3 Data Sheet

Respondol ATF 3-6 Data Sheet

Respondol ATF 3-3 Safety Data Sheet

Respondol ATF 3-6 Safety Data Sheet

Angus Fire Jetfoam

JetFoam is the world’s first film forming, fluorine free (FF) foam high performance foam concentrate, designed for extinguishing and securing flammable aviation fuel spills and fires (Jet A and Jet A1).

• Fast knock-down and extinguishment exceeding the requirements of ICAO level B
• True Newtonian (low viscosity) foam to ensure accurate, easy induction and airport crash vehicle compatibility
• Fluorine free
• Induction rates of 1, 3 and 6%.
• JetFoam won the 2016 Gold Green Apple Award in the Science and Technology category for its environmental properties.
• Strong enough to tackle aviation fuel spills and fires.

JetFoam 1 Data Sheet

JetFoam 3 Data Sheet

JetFoam 6 Data Sheet

JetFoam 3 Safety Data Sheet

JetFoam 6 Safety Data Sheet

Angus Fire Forexpan Class A Foam

Forexpan is a synthetic fire fighting foam concentrate specially formulated for Class A applications such as forestry and wildland fire control, structural fires and tyre and paper fires.

The balanced chemical system in Forexpan reduces the surface tension of water to increase the penetrating power into burning Class A materials.

Forexpan Data Sheet

Forexpan Safety Data Sheet

Expandol high expansion foam

Expandol is a superior quality high expansion fire fighting foam concentrate for extinguishing and securing flammable hydrocarbon liquid fires. Expandol produces large-volumes of high expansion foam for use in total flooding applications, marine fire fighting and Liquefied Natural Gas (LNG) applications.

• Initial contact with fire generates a large volume of steam reducing the available oxygen to create an inert atmosphere.
• The high water content of medium expansion foam produces a valuable cooling effect.
• The large volume of foam generated engulfs the area and totally seals off and extinguishes any remaining fires.

Expandol Data Sheet

Expandol Safety Data Sheet

Trainol 6

Trainol 6 is a fluorosurfactant free training foam which mimics the application and physical properties of Angus Tridol C6 S AFFF 6% fire fighting foam.

• Mimics the performance of Angus Tridol S 6 AFFF
• Can be used routinely as a substitute for vehicle and equipment testing

Trainol 6 should be used in training through conventional foam induction and delivery equipment (such as the Angus Hi-Combat range of portable foam equipment). It is not recommended for real life fire fighting incidents.

Trainol 6 Training Foam Data Sheet

Trainol 6 Training Foam Safety Data Sheet

BLAZETAMER380™ water enhancer

BLAZETAMER380™ is a water enhancer used for increasing the efficiency of water for the purpose of Class A Fire Suppression.

In diluted mixture for fire fighting applications BLAZETAMER380™ delivers significantly superior fire extinguishing performance characteristics, resulting in substantially less water use and a reduction in the time required to extinguish the fire. BLAZETAMER380™ requires no clean-up and trials have resulted in greatly reduced instances of re-ignition.

Using BLAZETAMER380™ the fire fighter takes the offensive approach to attack the fire, minimizing the fire effects in the wildland/urban interface. The unique properties of BLAZETAMER380™ provide an excellent medium, which can be created using backpacks and all handlines. This ground application is particularly useful in building a fire line, and for direct attack, prescribed burning and mop-up operations.

BLAZETAMER380™ is especially beneficial for any type of air attack, including helicopters and fixed wing aircraft. It is well suited to provide accurate and reduced drop zone footprint by reducing drift caused by strong winds by up to 71%.

BLAZETAMER380™ solution dropped from aircraft or helicopters will assist in controlling fire spread and greatly reduce the amount of time required and water used to successfully attack the fire. The unique formulation of BLAZETAMER380™ creates an excellent fire break by penetrating Class A materials to increase the moisture content of the fuel, thus inhibiting ignition.

Ideally suited to aerial and ground application for wildfire fighting and structural fire fighting, BLAZETAMER380™ has also been proven to be very effective in the suppression of Class A, Class B and Class F fires.

Developed and successfully tested in wildfire conditions, new BLAZETAMER380™ concentrate uses up to 35% less water to extinguish fires. BLAZETAMER380™ guarantees safe handling for fire fighters and is proven harmless to humans, animals and vegetation. BLAZETAMER380™ is not a gel or a foam and it is totally noncorrosive.

Features

• Meets USDA Forest Service Requirement per Specification 5100-306a.
• Environmentally responsible formulation.
• Non Toxic, Non Hazardous, Non Corrosive (USDA-FS)
• No residual clean up requirement
• Contains NO alcohols
• Complies with OH and S regulations
• Assists pilots in hitting targeted drop zone/area consistently by reducing spray drift
• Reduces pumping load dynamics
• Reduces evaporation rate
• Fast knockdown
• Inhibits re-ignition
• Biodegradable
• BLAZETAMER380™ is not a super-absorbent

BLAZETAMER380™ delivers laminar flow. Laminar flow, the opposite of turbulent flow, occurs with water at higher velocities.

This translates into:

• Reduced pumping load dynamics caused by friction
• Reductions in pumping pressures
• Less wear and tear on pumping equipment
• Faster, friction modified, hose line flow effort
• Increases throw by up to 100% safer for firefighters

BLAZETAMER380 Brochure